| Customization: | Available |
|---|---|
| Material: | PTFE |
| Kind: | White Plastic Sheet |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. PTFE ROD
Types and specifications:
Pressed rod: Dia 2~4mm L: Produced under requirements
Extruded rod: Dia 5~120mm L: 500~3000mm
Molded rod: Dia 55~300mm L: 100~500mm
Main properties
Apparent density: 2.10~2.30g/cm3
Tensile strength >14.00Mpa
Crack Elongation >140%
Applications: Electrical insulation, seal, anti-sticking materials.
2. PTFE SHEET
Types and specifications:
Skived sheet: Thickness 0.5~6mm L>500mm
Molded sheet: Thickness: 8-100mm Length X Width: 150X150mm; 300X300mm;
500X500mm; 600X600mm; 800X800mm; 1000X100mm; 1200X1200mm; 1500X1500mm; 1000X2000mm
Main properties
Apparent density: 2.10~2.30g/cm3
Tensile strength >15.00Mpa
Crack Elongation >150%
Dielectric strength>10Kv/mm
Applications: Electrical insulation, seals, lining bearing pads
3. PTFE FILM
Types and specifications:
Skived film: Thickness 0.05~0.5mm L>10000mm
Main properties
Apparent density: 2.10~2.30g/cm3
Tensile strength >20.00Mpa
Crack Elongation >250%
Dielectric strength>10Kv/mm
Applications: Lining, wire isolation, electrical instrument isolation
4. PTFE sealing tape
Types and specifications:
Unsintered tape: Thickness 0.045~0.10mm Width: 12, 13, 18, 19, 25, 100mm Length: 5.10, 15, 20, 40, 60, 80, 100M
Main properties
Apparent density: 0.2~1.5g/cm3
Tensile strength >9.00Mpa
Crack Elongation >80%
Residual iubricant content <0.5%
Applications: Packing and thread sealing for water pipes.
5. PTFE PIPE
Types and specifications:
Pressed pipe: Wall thickness 0.1~1.5mm L: Produced under requirements
Extruded pipe: Wall thickness 1.5~10mm L: Produced under requirements
Molded pipe: Wall thickness 5~100mm L: 30~300mm
Main properties
Apparent density: 2.10~2.30g/cm3
Tensile strength >18.00Mpa
Crack Elongation >230%
Applications: Insulated pipe casing for wire, pipe for corrossive fluids, electrica insulated parts used in high frequent conditions Item Unit Value Tensile strength MPa ≥15.0
Ultimate elongation % ≥150
Apparent density g /cm 3 2.1-2.3
Dialectic strength KV/mm ≥10
){kind=link}